The Introduction of 2A12 Aluminum Sheet Plate
2A12 Aluminum sheet plate is a high-strength hard aluminum alloy in the aluminum-copper-magnesium system, which can be strengthened by heat treatment. Its composition is reasonable and its comprehensive performance is good. The spot welding of 2A12 aluminum plate has good weldability, and there is a tendency to form intergranular cracks when gas welding and argon arc welding are used. The machinability of 2A12 aluminum plate is still good after cold work hardening. The corrosion resistance of 2A12 aluminum plate is not high, and anodic oxidation treatment and painting method or aluminum coating are often used on the surface to improve the corrosion resistance.Click to Order
The Product Specification of 2A12 Aluminum Sheet Plate
Alloy | 2A12 aluminum sheet plate |
Temper | O,T3,T4,T351,H112,etc. |
Thickness (mm) | 0.1-600 |
Width (mm) | 800-2650 |
Length (mm) | 500-16000 |
Application | Molds, high-strength parts, thick plates, heavy forgings, etc. |
Chemical composition:
Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Zr | Others | AL | |
2A12 | 0.5 | 0.5 | 3.80-4.90 | 0.30-0.90 | 1.20-1.80 | - | 0.3 | 0.15 | - | Single | Total | Balance |
0.05 | 0.15 |
Mechanical properties:
Alloy & Temper | Tensile strength Rm/Mpa | Yield strength Rp0.2/Mpa | Elongation % | Hardness HBWα |
2A12-T4 | 425 | 275 | 12 | 120 |
Physical properties:
Alloy & Temper | Thermal expansion coefficient(20-100℃) µm/m•k | Melting point range(℃) | Conductivity 20℃(68°F)(%IACS) | Resistivity 20(68°F)Ωmm2/m | Density(20℃)(g/cm³) |
2A12-T4 | 22.9 | 502-638 | 30 | 0.057 | 2.8 |
The Product Features of 2A12 Aluminum Sheet Plate
- 2A12 aluminum plate surface has no oil spots, no waves, no scratches, no roll marks, neat trimming, and no burrs.
- 2A12 aluminum plate has the advantages of low density, high strength, good processing performance, etc., and has good heat resistance.
- 2A12 aluminum plate has high strength and certain heat resistance, and can be used as working parts below 150°C.
The Application of 2A12 Aluminum Sheet Plate
2A12 aluminum plate is mostly used in machine appearance structure (skin, skeleton, rib beam, bulkhead, etc.), wing, mold, military industry, transportation vehicle, compressor, rivet, missile component, truck hub, propeller component and other various structure.