If you are looking for a detailed user guide then, you can easily follow these points and get solutions regarding your device. Just be on the guide till the end and make sure you get there.
Manual Login Guide Of Wavlink
Now let's look at how to manually login to the Wavlink extender:
Get your hand on a device like- a phone, tablet, or laptop the moment you see the LED light on the Wavlink extender.
Reach the settings on the Wavlink device. Once you reach it, tap on the WiFi option.
You will automatically see the model name Wavlink AC600 extender for setup in the network center.
The moment you connect the ‘EXT’ network you will see the Wavlink Extender Setup_ EXT name.
Type wifi.wavlink.com in the address bar to easily get access over the wifi.wavlink.com login page.
This was the final step of this procedure. If you are not getting how to get it, follow the next procedure.
WiFi Protected Setup - WPS Method
This is the easiest way to get the setup done without accessing the wifi.wavlink.com login page, but first, you need to connect to the existing wifi networks. Below given are the steps to install the extender:
In the first procedure connect the Wavlink extender to an active power socket. Although turn on the Wavlink range extender, take some time to blink the device solid green. Push the WPS button on the extender to get the LED light properly. Therefore reach the router and push the WPS button on the router/modem. You will start observing a green blinking light on the router and the extender. Make sure to wait at least 1-2 minutes to sync the home Wi-Fi with the extender. So get ready to fly as the wavlink extender setup is completed successfully. Login to the App page to complete the installation. Take your device which is connected to the Wavlink network and go to its app store later. Get the Wavlink WiFi app on that smartphone for further processing. Once this is done, open the app and login to the extender. Finally, follow the screen directions to complete the installation.
What Does The Purple Light Mean?
The fading of blue light could really affect the signal strength of the Wavlink extender. If the light indicator is purple what does it reflect?
The strong purple light is an indicator of a weak connection to the device. Something is definitely there which is blocking the connection or it might be the router that is out of the coverage area.
The router will not be syncing the extender, so make sure it does that. After attempting sync if the purple light is still visible it means the process has gone unsuccessful.
Before you do anything, ensure whether the light is coming from the router or the Wavlink extender.
Restart The Entire Wavlink Network
Taking care of this step requires you to turn on your extender, and router. It didn't seem to be much of a help to fix the lights on the router. Restarting the Wavlink network could actually work.
Some major steps to fix the Wavlink extender. These steps may take some time and patience, in order to set up your Wavlink.
Unfix all the connections by adding the power source to the extender and the existing router.
But after booting the connection starts over the connection after stabilizing the association.
After power sourcing the Wavlink extender and the router, wait some moment to connect and boot up the Wavlink devices.
Access More Settings After The Setup
By connecting the monitor you can control the network and set it up to the monitor.
Through my media, you can seamlessly stream videos and music files from your smartphone.
You can add prints to the iPads and phones by adding printers.
Just make sure to locate the QR code to secure the connection on the mobile through the EZ feature on the mobile phone. The gadgets like tablets could also take their place.
You can also access the parental control feature through smartphones.
The apps of the Network can be controlled through the monitor Network settings very easily.
Without any problem, you can also monitor the in-house networks.
While using the analytics you can monitor the WiFi Analytics network.
You can also debug the network settings issue.
Now check whether the purple light on the extender vanished and whether the Wavlink network is successfully restarting this time. And the wifi.wavlink.com login issues finally will be resolved.
